Pull the lever up, insert a conduit and push the lever back down. WAGO's 221 series splice connectors easily, quickly and securely connect solid, bonded and fine-stranded conductors.
-
Compact stitching connection. for all pipeline types
-
Inline connection of installation lines
-
Simple Line Extension
-
Multiple poles and fixed position installation via adapter
-
Ideal for test setups
-
DIN-Rail mounting
-
Available with 2, 3 and 5 wire connectors and 2 wire Inline
-
Ambient temperature: 85°C (T85)
-
Quickly install devices with higher energy consumption
-
Safely install long cable runs with larger conductor cross-sections
Quickly and easily connect all types of conductors of different cross-sections using two-, three- and five-wire terminal blocks. The new connectors feature fine-coil conductors from 0.14 to 4 mm², as well as solid and conductive strands from 0.2 to 4 mm² (24–12 AWG). With the 6 mm² (10 AWG) variant, you can connect all types of conductors – with cross sections from 0.5 to 6 mm² (2−10 AWG).
With the new 221 series connectors, you can now test the voltage from both sides – even when they are installed.
Whether it's a DIN-35 rail or a DIN-15 rail with the right adapter, the 221 series staple connectors can easily snap or screw onto both types of rail
KNX LINKS
-
Compact 4-conductor KNX/EIB sockets with PUSH WIRE® connection
-
Thrust termination of solid pipelines
-
The four-conductor inputs allow device replacement without interrupting the KNX/EIB bus connection
BUS CONNECTIONS
-
MICRO PUSH WIRE® socket for junction boxes or solid conductors 0.8 mm Ø
-
Ambient temperature: max 60°C
-
To the standards of the EN 60664 regulation
-
Rated voltage (II/2) 100V
-
Rated current 6A
4 and 6 link adapter for mounting / screwing on DIN-35 rail